- 2007-09 ~ 2011-07 华中科技大学 英国beat365官方网站入口 学士
- 2011-09 ~ 2016-09 英国beat365官方网站入口 机械与动力工程学院 博士
- 2016-10 ~ 2018-04 日本大阪大学接合科学研究所 特别研究员
- 2018-05 ~ 2019-09 加拿大多伦多大学英国beat365官方网站入口 博士后
- 2019-10 ~ 2023-07 英国beat365官方网站入口 副教授
- 2021-10 ~ 2021-12 英国伦敦大学学院机械工程系 访问学者
- 2023-08 ~ 至今 英国beat365官方网站入口 长聘副教授
- 增材制造与激光制造
- 同步辐射原位表征
面向航空、航天、核、船舶、汽车等行业的应用需求,围绕“激光制造”这个“卡脖子”核心技术领域,主持国家高层次青年人才项目、国自然面上、国自然青年、欧盟玛丽居里学者、上海市自然科学基金面上、上海市青年科技英才扬帆、英国beat365官方网站入口新进教师科研启动基金、上海交大-瑞典皇家理工国际合作项目等多项国内外科研项目,入选《麻省理工科技评论》2022年度中国“35岁以下科技创新35人”。
代表性项目如下:
(1)国家高层次青年人才项目,2021-01至2023-12,在研,主持
(2)国家自然科学基金委员会,面上项目,52075327,铜合金构件蓝激光粉末沉积增材制造成形机理研究,2021-01至2024-12,在研,主持
(3)国家自然科学基金委员会,青年项目,52004160,超薄电工钢叠片定子铁芯脉冲激光微点焊机理研究,2021-01至2023-12,在研,主持
(4)国家商用飞机制造工程技术研究中心创新基金,商用飞机铝基复合材料结构蓝激光粉末沉积增减材一体化快速制造技术,2022-10至2024-09,在研,主持
(5)英国beat365官方网站入口,新进教师启动项目,增材制造与激光制造,2019-10至2025-12,在研,主持
(6)英国beat365官方网站入口,英国beat365官方网站入口-康奈尔国际合作项目,增材制造材料、工艺和结构,2020-04至2021-12,在研,主持
(7)汉高公司企业合作项目,高端电机胶粘电工钢叠片性能测试与数值模拟,2023-1至2024-12,在研,主持
(8)上海市科学技术委员会,扬帆计划,20YF1419200,纳米颗粒增强铝基复合材料蓝激光同轴送粉增材制造工艺机理研究,2020-07至2023-06,在研,主持
(10)上海市科学技术委员会,自然基金面上项目,20ZR1427500,铝基复合材料蓝激光选区熔化增材制造成形规律及质量调控,2020-07至2023-06,在研,主持
(11)安徽省淮北市科学技术局,重大科技专项,Z2020001,陶铝材料大型构件蓝激光粉末沉积增材制造成形机理及质量调控方法研究,2020-07至2022-09,结题,主持
(12)中科煜宸企业合作项目,多组分铜铝合金弹性材料激光熔化沉积原位合金化制备,2023年,结题,主持
(13)汉高公司企业合作项目,高端电机电工钢叠片胶粘剂性能测试,2021-11至2022-10,在研,主持
(14)英国beat365官方网站入口,英国beat365官方网站入口-瑞典皇家理工国际合作项目,增材制造材料、工艺和结构,2020-04至2021-12,结题,主持
(15)欧盟玛丽居里基金会,玛丽居里学者(Marie Skodowska Curie Individual Fellowships),Metal flow in laser additive manufacturing using x-ray imaging and machine learning,结题,主持
- Jierui Mu, Tengteng Sun, Chu Lun Alex Leung, J. P. Oliveira, Yi Wu, Haowei Wang, Hongze Wang*, Application of electrochemical polishing in surface treatment of additively manufactured structures: a review, Progress in Materials Science, 2023.
- Luo, Sheng, Yu Ouyang, Qianglong Wei, Shuyue Lai*, Yi Wu, Haowei Wang, and Hongze Wang*. "Understanding the breakup behaviors of liquid jet in gas atomization for powder production." Materials & Design 227 (2023): 111793.
- Wang, An, Qianglong Wei, Sheng Luo, Zijue Tang, Huihui Yang, Yi Wu, Chu Lun Alex Leung, Peter D. Lee, Haowei Wang, and Hongze Wang*. "Blue laser directed energy deposition of aluminum with synchronously enhanced efficiency and quality." Additive Manufacturing Letters 5 (2023): 100127.
- Yang, Huihui, Zijue Tang, Le Wan, Qianglong Wei, Jiayin Wu, An Wang, Xinyuan Jin, Xianfeng Li, Yi Wu*, Guojie Lu, Hongze Wang*, Haowei Wang, "Achieving crack-free CuCrZr/AlSi7Mg interface by infrared-blue hybrid laser cladding with low power infrared laser." Journal of Alloys and Compounds 931 (2023): 167572.
- Tang, Z., Zhang, X., Wan, L., Ouyang, Y., Gao, Z., Wei, Q., Wang, A., Yang, H., Wu, Y., Zhang, Y., Wang haowei, and Wang, Hongze*, 2023. Blue laser welding of laminated electrical steels: dynamic process, weld bead characteristics, mechanical and magnetic properties. Journal of Materials Processing Technology, p.117859.
- 孙腾腾, 王洪泽*, 吴一*, 汪明亮, 王浩伟,原位自生2%TiB2颗粒对2024Al增材制造合金的组织和力学性能影响研究,金属学报,2023.
- Gao, Zhenyang, Hongze Wang*, Nikita Letov, Yaoyao Fiona Zhao*, Xiaolin Zhang, Yi Wu*, Chu Lun Alex Leung, and Haowei Wang. "Data-driven design of biometric composite metamaterials with extremely recoverable and ultrahigh specific energy absorption." Composites Part B: Engineering (2022): 110468.
- Guo, Liping, Hongze Wang*, Hanjie Liu, Yuze Huang, Qianglong Wei, Chu Lun Alex Leung, Yi Wu*, and Haowei Wang. "Understanding keyhole induced-porosities in laser powder bed fusion of aluminum and elimination strategy." International Journal of Machine Tools and Manufacture (2022): 103977.
- Gao, Zhenyang, Hongze Wang, Hua Sun, Tengteng Sun, Yi Wu, Chu Lun Alex Leung, and Haowei Wang. "Additively manufactured high-energy-absorption metamaterials with artificially engineered distribution of bio-inspired hierarchical microstructures." Composites Part B: Engineering 247 (2022): 110345.
- Tang, Zijue, Qianglong Wei, Zhenyang Gao, Huihui Yang, An Wang, Le Wan, Cheng Luo, Yi Wu, Haowei Wang, and Hongze Wang*. "2000W Blue laser directed energy deposition of AlSi7Mg: process parameters, molten pool characteristics, and appearance defects." Virtual and Physical Prototyping 18, no. 1 (2023): e2120405.
- Yang, Huihui, Zijue Tang, Le Wan, Qianglong Wei, Jiayin Wu, An Wang, Xinyuan Jin, Xianfeng Li, Yi Wu*, Guojie Lu, Hongze Wang*, Haowei Wang. "Achieving crack-free CuCrZr/AlSi7Mg interface by infrared-blue hybrid laser cladding with low power infrared laser." Journal of Alloys and Compounds 931 (2023): 167572.
- Guo, Liping, Hongze Wang*, Qianglong Wei, Hanjie Liu, An Wang, Yi Wu*, and Haowei Wang. "A comprehensive model to quantify the effects of additional nano-particles on the printability in laser powder bed fusion of aluminum alloy and composite." Additive Manufacturing 58 (2022): 103011.
- Sun, Tengteng, Jian Chen, Yi Wu*, Mingliang Wang, Yanan Fu, Hongze Wang*, and Haowei Wang. "Achieving excellent strength of the LPBF additively manufactured Al–Cu–Mg composite via in-situ mixing TiB2 and solution treatment." Materials Science and Engineering: A 850 (2022): 143531.
- Zhang, Xiaolin, Zijue Tang, Yi Wu*, Oleg Devoino, Haowei Wang, and Hongze Wang*. "Progress in in situ x-ray imaging of welding process." Review of Scientific Instruments 93, no. 7 (2022): 071501.
- Sun, Tengteng, Hongze Wang*, Yakai Xiao, Guandong Luo, Huihui Yang, Yi Wu*, Mingliang Wang*, and Haowei Wang. The role of in-situ nano-TiB2 particles in improving the printability of noncastable 2024Al alloy, Materials Research Letters, 2022.
- Sun, Tengteng, Yakai Xiao, Guandong Luo, Huihui Yang, Yi Wu*, Mingliang Wang*, Hongze Wang*, and Haowei Wang. "Roadmap to Improve the Printability of a Non-Castable Alloy for Additive Manufacturing." Metallurgical and Materials Transactions A (2022): 1-16.
- Yang, H., Wu, J., Wei, Q., Tang, Z., Wang, A., Jin, X., Li, X., Wu, Y.*, Lu, G., Wang Haowei and Wang Hongze*, 2022. Stable cladding of high reflectivity pure copper on the aluminum alloy substrate by an infrared-blue hybrid laser. Additive Manufacturing Letters, 3, p.100040.
- Jia, H., Sun, H., Wang, Hongze*, Wu, Y.* and Wang, H., 2022. Size effect in selective laser melting additive manufacturing of 700 mm large component. Journal of Manufacturing Processes, 75, pp.125-137.
- Luo, Sheng, Hongze Wang*, Zhenyang Gao, Yi Wu, and Haowei Wang. "Interaction between high-velocity gas and liquid in gas atomization revealed by a new coupled simulation model." Materials & Design (2021): 110264.
- 王洪泽*,吴一,王浩伟,蓝激光在有色金属成形领域的应用研究现状,有色金属学报,2021年 (优秀论文奖)
- Kawakami, H. , Kuno, H. , Kawahito, Y. , Hongze Wang*. (2021). Hardness enhancement by molten metal flow in laser remelting with an ultra-thin additional element coating. Journal of Materials Processing Technology, 116888.
- Wang, An, Hongze Wang*, Yi Wu, and Haowei Wang. "3D printing of aluminum alloys using laser powder deposition: a review." The International Journal of Advanced Manufacturing Technology (2021): 1-37.
- Jia H, Sun H, Wang H*, Wu Y*, Haowei Wang. Scanning strategy in selective laser melting (SLM): a review[J]. The International Journal of Advanced Manufacturing Technology, 2021: 1-23.(ESI高被引论文)
- Xia, C.; Hongze Wang*; Wu, Y.; Wang, H. Joining of the Laminated Electrical Steels in Motor Manufacturing: A Review. Materials 2020, 13, 4583
- Chen Y, Wang H*, Wu Y*, et al. Predicting the Printability in Selective Laser Melting with a Supervised Machine Learning Method[J]. Materials, 2020, 13(22): 5063.
- Liu, Z. #, Wang, H.# , Michel J.R Haché, Chu, X. , & Zou, Y.*. (2020). Prediction of heterogeneous microstructural evolution in cold-sprayed copper coatings using local zener-hollomon parameter and strain. Acta Materialia.
- Zhiying Liu#, Hongze Wang#, M., Haché, E. Irissou, Y. Zou*, Formation of refined grains below 10 nm in size and nanoscale interlocking in the particle–particle interfacial regions of cold sprayed pure aluminum, Scripta Materialia, 2020, 177, pp. 96-100. Doi: 10.1016/j.scriptamat.2019.09.018
- Hongze Wang, Yu Zou*, Microscale interaction between laser and metal powder in powder-bed additive manufacturing: Conduction mode versus keyhole mode, International Journal of Heat and Mass Transfer, 2019, 142, pp. 118473. doi: 10.1016/j.ijheatmasstransfer.2019.118473
- Kawahito Yousuke, Hongze Wang*, In-situ Observation of Laser Manufacturing with X-ray Technique, Synchrotron Radiation News, 2019, 32.2, pp. 14-19. doi.org/10.1080/08940886.2019.1582283 (Invited by the guest editor)
- Hongze Wang*, Yosuke Kawahito*, Yuya Nakashima, Kunio Shiokawa, Coupled effects of heating methods and rates on the measured non-isothermal austenization temperature of steel SUS420J1, ASME Manufacturing Science and Engineering, 2018, 140(6), pp. 061014(1-10). doi: 10.1115/1.4039115
- Hongze Wang*, Yosuke Kawahito*, Ryouhei Yoshida, Yuya Nakashim, Kunio Shiokawa, A model to calculate the laser absorption property of actual surface, International Journal of Heat and Mass Transfer, 2018, 118, pp. 562-569. doi.org/10.1016/j.ijheatmasstransfer.2017.11.023
- Hongze Wang*, Motoki Nakanishi, Kawahito Yousuke*, Dynamic balance of heat and mass in high power density laser welding, Optics Express, 2018, 26(5), pp. 6392-6399. doi.org/10.1364/OE.26.006392
- Masanori Miyagi, Yousuke Kawahito, Hongze Wang*, Hiroshi Kawakami, Takahisa Shoubu. X-ray phase-contrast observation of solidification and hot crack propagation in laser spot welding of aluminum alloy, Optics Express, 2018, 26, pp. 22626-22636. doi.org/10.1364/OE.26.022626
- Kawahito Yousuke*,#, Wang Hongze*,#, In-situ observation of gap filling in laser butt welding, Scripta Materialia, 2018, 154, pp. 73-77. doi.org/10.1016/j.scriptamat.2018.05.033
- Masanori Miyagi, Hongze Wang*, Ryohei Yoshida, Yousuke Kawahito, Hiroshi Kawakami, Takahisa Shoubu, Effect of alloy element on characteristics of keyhole and molten pool in laser welding of aluminum alloys, Scientific Reports, 2018. doi.org/10.1038/s41598-018-31350-4
- Hongze Wang*, Yousuke Kawahito*, Nishimoto Koji, A Laser Joining System for Titanium and Polyethylene Terephthalate Plastic Controlled by Multiple Signal Sources. IEEE Transaction on industrial electronics, 2018, 66(2), pp. 1255 - 1263. DOI: 10.1109/TIE.2018.2831190
- Yousuke Kawahito, Hongze Wang*, Seiji Katayama, Daichi Sumimori, Ultra high power (100 kW) fiber laser welding of steel, Optics Letters, 2018, 43(19), pp. 4667-4670. Doi: 10.1364/OL.43.004667
- Hongze Wang*, Yosuke Kawahito, Ryohei Yoshida, Yuya Nakashima, Kunio Shiokawa, Development of a high-power blue laser (445 nm) for material processing, Optics Letters, 2017, 42 (12), pp. 2251-2254. doi.org/10.1364/OL.42.002251
- Hongze Wang*, Motoki Nakanishi, Yosuke Kawahito*, Effects of welding speed on absorption rate in partial and full penetration welding of stainless steel with high brightness and high power laser, Journal of Materials Processing Technology, 2017, 249, pp. 193-201. doi.org/10.1016/j.jmatprotec.2017.06.014
- Hongze Wang, Yansong Zhang*, Modelling of eddy current loss of the welded electrical steel laminations. IEEE Transaction on industrial electronics, 2017, 64(4), pp. 2992- 3000. DOI: 10.1109/TIE.2016.2636203
- Hongze Wang, Yansong Zhang*, Kunkun Chen, Modeling of Temperature Distribution in Laser Welding of Lapped Martensitic Steel M1500 and Softening Estimation, ASME Manufacturing Science and Engineering, 2016, 138 (11), pp. 111006(1-9). doi: 10.1115/1.4033391
- Hongze Wang, Yansong Zhang*, Shuhui Li, Laser Welding of Laminated Electrical Steels. Journal of Materials Processing Technology, 2016, 230, pp. 99-108. doi.org/10.1016/j.jmatprotec.2015.11.018
- Hongze Wang, Yansong Zhang*, Xinmin Lai, Effects of interfaces on heat transfer in laser welding of electrical steel laminations. International Journal of Heat and Mass Transfer, 2015, 90, pp. 665-677. doi.org/10.1016/j.ijheatmasstransfer.2015.07.027
- Hongze Wang, Yansong Zhang*, Xinmin Lai, A model for the torsion strength of a laser-welded stator. Journal of Materials Processing Technology, 2015, 223, pp. 319-327. doi.org/10.1016/j.jmatprotec.2015.04.012
- 其它作者文章:
- Yang, H., Wang, Z., Wang, H., Wu, Y., & Wang, H. (2023). Microstructure, mechanical property and heat treatment schedule of the Inconel 718 manufactured by low and high power laser powder bed fusion. Materials Science and Engineering: A, 863, 144517.
- Ding, Han, Yakai Xiao, Zeyu Bian, Yi Wu, Huihui Yang, Yang Li, Zhe Chen, Hongze Wang, and Haowei Wang. "Effect of in-situ TiB2 particles on microstructure and mechanical properties of Al–Fe–Ni manufactured by selective laser melting." Materials Science and Engineering: A 845 (2022): 143065.
- Zhang, An, Yanfeng Xing*, Fuyong Yang, Xiaobing Zhang, Hongze Wang, and Tiejun Yu. "Development of a New Cold Metal Transfer Arc Additive Die Manufacturing Process." Advances in Materials Science and Engineering 2021 (2021).
- Ding, Han, Yakai Xiao, Zeyu Bian, Yi Wu, Huihui Yang, Hongze Wang, and Haowei Wang. "Design, microstructure and thermal stability of a novel heat-resistant Al-Fe-Ni alloy manufactured by selective laser melting." Journal of Alloys and Compounds (2021): 160949.
- Xiao, Y. K., Z. Y. Bian, Y. Wu, G. Ji, Q. Lian, H. Z. Wang, Z. Chen, and H. W. Wang. "Simultaneously minimizing residual stress and enhancing strength of selective laser melted nano-TiB2 decorated Al alloy via post-uphill quenching and ageing." Materials Characterization (2021): 111242.
- Yu, J. , Zhang, D. , Li, H. , Song, C. , & Wang, H. . (2020). Detection of internal holes in additive manufactured ti-6al-4v part using laser ultrasonic testing. Applied Sciences, 10(1), 365.
- Yansong Zhang*, Hongze Wang, Kunkun Chen, Shuhui Li, Comparison of laser and TIG welding of laminated electrical steels. Journal of Materials Processing Technology, 2017, 247, pp. 55-63. doi.org/10.1016/j.jmatprotec.2017.04.010
- Jingjing Yang, Huihui Yang, Hanchen Yu, Zemin Wang*, Hongze Wang, Xiaoyan Zeng, A novel approach to in-situ fabricate Ti-6Al-4V alloy with graded microstructure and property by selective laser melting, Materials Letters, 2018, 215, pp. 246-249. doi.org/10.1016/j.matlet.2017.12.098
- Yong Xie, Ming Gao*, Fude Wang, Chen Zhang, Kangda Hao, Hongze Wang, Xiaoyan Zeng, Anisotropy of fatigue crack growth in wire arc additive manufactured Ti-6Al-4V. Materials Science and Engineering: A, 2018, 709, pp. 265-269. doi.org/10.1016/j.msea.2017.10.064
- Kunkun Chen, Yansong Zhang*, Hongze Wang. Effect of acoustic softening on the thermal-mechanical process of ultrasonic welding. Ultrasonics, 2017, 75, pp. 9-21. doi.org/10.1016/j.ultras.2016.11.004
- Kunkun Chen, Yansong Zhang, Hongze Wang. Study of plastic deformation and interface friction process for ultrasonic welding. Science and Technology of Welding and Joining, 2016, 22(3), pp. 208-216. doi.org/10.1080/13621718.2016.1218601
- 国际SCI期刊《Journal of Materials Science and Technology》 青年编委
- 国际SCI期刊《Materials》 客座编辑
- 国际SCI期刊《Frontiers In Materials》 客座编辑
- 国际SCI期刊《Journal of Iron and Steel Research International》 Key Reader
- 《机械工程导报》 编委
- 《粉末冶金材料科学与工程》 编委
- 《钢铁研究学报》 青年编委
- 焊接杂志社 青年编委
- 先进焊接与连接专业委员会 委员
- 激光加工专委会 会员
- 机械工程学会高级 会员
- 教育部学位论文 评审专家
- 国家自然科学基金通讯评议库 专家
- 有色金属智库 专家
- 担任IEEE Transactions on Industrial Electronics, Scripta Materialia, Materials Design, International Journal of Heat and Mass Transfer等数十个期刊的审稿人
- 国家高层次青年人才,2021年
- 《麻省理工科技评论》中国“35岁以下科技创新35人”,2022年
- 欧盟玛丽•居里学者,2020年
- 上海市国际人才蓄水池工程,2020年
- 上海市扬帆青年学者,2020年
- 2022年度校优秀班主任,2022年
- 院青年教师立德树人教学竞赛三等奖,2022年
- “英国beat365官方网站入口2022年本科招生工作先进团队成员,2022年
- 2022年”互联网+”上海市铜奖(成员:魏强龙等)指导老师,2022年
- 第三届中央军委科技局“源创杯”创新创意大赛入围全国总决赛,2022年
- 《有色金属学报》优秀论文,2021年
- Journal of Manufacturing Process优秀审稿人,2018年
- 英国beat365官方网站入口首届优秀博士论文(全校14篇),2016年
- 英国beat365官方网站入口优秀毕业生,2016年
- 博士生国家奖学金,2015年
- 大学生CCTV机器人电视大赛全国总冠军,2011年